Description
The Chattanooga Electrotherapy Lead Wire Cable (Chattanooga Lead Wires) from Rehabcare is a two-wire set that carries current from the stimulator to the self-adhesive electrodes on the patient’s body. It is also known as an electrical stimulation lead wire, as it is used in TENS, NMES and EMS muscle stimulation sessions. Each wire has a different color to identify its channel, so the therapist can connect it quickly without errors. It is compatible with Chattanooga Intelect devices used in physiotherapy centers.
Features of the Chattanooga Electrotherapy Lead Wires
- A different color for each channel, making it easy to identify channels during the session.
- Red pin connectors for the positive pole and black pin connectors for the negative pole.
- A fixed round connector that plugs directly into the device channel output.
- A flexible cable built to withstand daily clinical use.
- Tool-free installation, so the device is back in service quickly.
- Fits self-adhesive electrodes with a standard pin connector.
When Should You Replace Electrotherapy Lead Wires?
Lead wires usually wear out from frequent pulling and bending, which can weaken or interrupt the current during treatment. We recommend replacing the cable when the insulation is cracked, the connector tips become loose, or a channel error message appears on the device. It is also good practice to keep a spare set of lead wires in your clinic so sessions are never interrupted.
Which Devices Are Compatible with the Chattanooga Lead Wires?
These lead wires are designed for Chattanooga electrotherapy units, such as the Intelect series. However, connectors vary between some models, so please send us your device model before ordering so we can confirm compatibility. For example, we offer the Chattanooga Intelect Mobile 2 STIM Dual-Channel Electrotherapy Unit and the Chattanooga Intelect Mobile 2 Combo Electrotherapy and Ultrasound Unit.
How to Use the Electrical Stimulation Lead Wires
- First, switch off the device before connecting or disconnecting the cable.
- Next, plug the round connector into the appropriate channel output.
- Then, attach the red and black pins to the electrodes.
- Finally, disconnect the cable by holding the connector, not the wire itself, and avoid coiling it tightly.
Specifications
- Package contents: a set of two cables, one for channel 1 and one for channel 2.
- Product name: Chattanooga Electrotherapy Lead Wire Cable.
- Brand: Chattanooga.
- Colors: blue and green to identify channels.
- Connector tips: red positive pin and black negative pin.
- Compatibility: Chattanooga Intelect devices, depending on the device model.
Complementary Products
To complete your session setup, add the Self-Adhesive Electrotherapy Electrodes 5 cm. You can also browse our Electrotherapy Physiotherapy Devices and Physiotherapy Equipment and Supplies categories.
